Click here for Racor's PFF31795 product page.

<a href="https://bostechauto.com/ford-6-0l-fuel-filter-cap-pff31795/" rel="noopener noreferrer" target="_blank">Click here for Racor&apos;s PFF31795 product page</a><img src="https://uploads.gorgias.io/3RBN0xMOpj249GJP/PFF31795-d159014e-0b85-4b37-88bb-653d3979992d.jpg" style="width: 800px;" class="fr-fic fr-dib">

Racor PFF31795 Filter Cap

PurePower Technologies Turbocharger Actuator Installation. Troubleshooting. Click here for PurePower 8682-PP product page

PurePower Technologies Turbocharger Actuator Installation<ol><li>Drain engine cooling system to ensure actuator cooling chamber is fully drained. (Removal of actuator prior to draining coolant can lead to damage to the core that MUST be returned in good condition for core credit).</li><li>Make sure engine is not running and the key is in the off position. Disconnect the Actuator harness and turbocharger speed sensor.</li><li>Loosen and remove the four (4) m6 x 1 (5mm Allen Key) socket head screws and pull the actuator off the turbocharger.</li><li>Check to make sure sector gear (positioning arm) rotates freely from the left to right and there is no binding or sticking. If so, this may be a mechanical failure.</li><li>Rotate the sector gear (positioning arm) fully clockwise to align with the smaller reference hole (0.125&quot;) in the bearing housing that is closest to the firewall of the vehicle. Place a 0.125&quot; dowel pin or 1/8&quot; drill bit through the sector gear alignment hole into the small reference hole in the bearing housing. Remove the pin or drill bit and be sure to NOT MOVE the sector gear once aligned.</li><li>Place the NEW actuator in the engine compartment without obstructing the actuator gear.</li><li>Connect the electrical connections, actuator and turbocharger speed sensor.</li><li>Turn the key on, but DO NOT START ENGINE.</li><li>Using a proper scan tool (Snap-On or Matco) proceed to find &quot;System Tests&quot;. Please select the function for &quot;VGT Turbo Actuator Pre-Align/Self Calibrate&quot; option. Follow the instructions on the scan tool.</li><li>Once the actuator is pre-aligned, the scan tool will prompt you to install the actuator to the turbocharger. Make sure the sector gear is still aligned with the smaller reference hole closest to the firewall. Use the four (4) m6 x 1 socket head screws to secure the actuator to turbocharger. Torque the screws to 97 lbf.in (inch pounds) in the diagonal pattern.</li><li>Using the scan tool, continue to follow the instructions and perform the calibration of the actuator to the turbocharger.</li><li>Once calibration has been performed successfully, turn the key off.</li><li>Last refill the cooling system with NEW coolant.</li></ol>Troubleshooting<ul><li>Actuator will not calibrate<ul><li>Has vehicle been &quot;tuned&quot; or system modifications - Vehicle needs to be in &quot;stock&quot; settings for the turbocharger actuator to calibrate</li><li>Once the actuator has been calibrated the vehicle can be set back to customer&apos;s Tuned settings</li></ul></li></ul><img src="https://uploads.gorgias.io/3RBN0xMOpj249GJP/Actuator_Sector_Gear-c16fa447-e159-49b2-bc0a-7cbad63c5136.png" style="width: 500px;" class="fr-fic fr-dib"><a href="https://bostechauto.com/dodge-ram-6-7l-turbocharger-actuator-2007-2012-purepower-8682-pp/" rel="noopener noreferrer" target="_blank">Click here for PurePower 8682-PP product page</a>

PurePower 8682-PP Turbocharger Actuator Install

Bostech TBC0367815 Turbocharger Actuator Installation. Troubleshooting. Click here for TBC0367815 Actuator product page

Bostech TBC0367815 Turbocharger Actuator Installation<ol><li>Drain engine cooling system to ensure actuator cooling chamber is fully drained. (Removal of actuator prior to draining coolant can lead to damage to the core that MUST be returned in good condition for core credit).</li><li>Make sure engine is not running and the key is in the off position. Disconnect the Actuator harness and turbocharger speed sensor.</li><li>Loosen and remove the four (4) m6 x 1 (5mm Allen Key) socket head screws and pull the actuator off the turbocharger.</li><li>Check to make sure sector gear (positioning arm) rotates freely from the left to right and there is no binding or sticking. If so, this may be a mechanical failure.</li><li>Rotate the sector gear (positioning arm) fully clockwise to align with the smaller reference hole (0.125&quot;) in the bearing housing that is closest to the firewall of the vehicle. Place a 0.125&quot; dowel pin or 1/8&quot; drill bit through the sector gear alignment hole into the small reference hole in the bearing housing. Remove the pin or drill bit and be sure to NOT MOVE the sector gear once aligned.</li><li>Place the NEW actuator in the engine compartment without obstructing the actuator gear.</li><li>Connect the electrical connections, actuator and turbocharger speed sensor.</li><li>Turn the key on, but DO NOT START ENGINE.</li><li>Using a proper scan tool (Snap-On or Matco) proceed to find &quot;System Tests&quot;. Please select the function for &quot;VGT Turbo Actuator Pre-Align/Self Calibrate&quot; option. Follow the instructions on the scan tool.</li><li>Once the actuator is pre-aligned, the scan tool will prompt you to install the actuator to the turbocharger. Make sure the sector gear is still aligned with the smaller reference hole closest to the firewall. Use the four (4) m6 x 1 socket head screws to secure the actuator to turbocharger. Torque the screws to 97 lbf.in (inch pounds) in the diagonal pattern.</li><li>Using the scan tool, continue to follow the instructions and perform the calibration of the actuator to the turbocharger.</li><li>Once calibration has been performed successfully, turn the key off.</li><li>Last refill the cooling system with NEW coolant.</li></ol>Troubleshooting<ul><li>Actuator will not calibrate<ul><li>Has vehicle been &quot;tuned&quot; or system modifications - Vehicle needs to be in &quot;stock&quot; settings for the turbocharger actuator to calibrate</li><li>Once the actuator has been calibrated the vehicle can be set back to customer&apos;s Tuned settings</li></ul></li></ul><img src="https://uploads.gorgias.io/3RBN0xMOpj249GJP/Actuator_Sector_Gear-c16fa447-e159-49b2-bc0a-7cbad63c5136.png" style="width: 500px;" class="fr-fic fr-dii"><a href="https://bostechauto.com/dodge-ram-6-7l-turbocharger-actuator-2007-2012-bostech-tbc0367815/" rel="noopener noreferrer" target="_blank">Click here for TBC0367815 Actuator product page</a>

Bostech TBC0367815 Turbocharger actuator install

Bostech's line of Cummins water pumps, covered by 13-Month Unlimited Mileage Warranty. The below chart is for reference to determine the correct water pump needed for your Cummins engine.

Cummins Water Pump Buyers Guide

Have product questions, we are here to help!
Need help with core returns or Technical questions, shoot us a quick email.

Available Mon-Fri 8am-5pm eastern standard time

Back to Website

Bostech Customer Care

Specific product specifications sold by Bostech, these pages will give details and/or instructions for specific products we sell.

Product Information

Racor PFF31795 Filter Cap

PurePower 8682-PP Turbocharger Actuator Install

Bostech TBC0367815 Turbocharger actuator install

Cummins Water Pump Buyers Guide